TP series is a compact infrared thermal imaging sensor utilizing a thermopile array detector. This CHINO developed detector allows the sensor to measure real time temperature. Ethernet connectivity allows the sensor to communicate with PC running CHINO Imaging Software or customer's LAN.
Download TP-H(6Hz analog output model) specification sheet.
| Easy to Use and Implement |
| 2000 pixel Resolution |
| Built-In Alarms |
| IP65 / NEMA4 |
| Model | Specification |
| TP-L0225EN | Low-temp type (-20 to 300°C), Viewable Angle: 25°x25°, Ethernet |
| TP-L0225UN | Low-temp type (-20 to 300°C), Viewable Angle: 25°x25°, USB |
| TP-L0260EN | Low-temp type (-20 to 300°C), Viewable Angle: 60°x60°, Ethernet |
| TP-L0260UN | Low-temp type (-20 to 300°C), Viewable Angle: 60°x60°, USB |
| TP-L0225EK | High-temp type (100 to 800°C), Viewable Angle: 25°x25°, Ethernet |
| TP-ZCC1 (optional) | Air Purge Case |
| Temp Range: |
Low-temp type -20 to 300°C High-temp type 100 to 800°C |
| Resolution: | 0.5°C (At black body temperature of 100°C) |
| Accuracy: |
Low-temp type ±2% of reading or ±3°C whichever lager High-temp type ±1% of reading or ±3°C whichever lager(At Ambient temp of 25°C ±2°C) |
| Detector: | Thermopile array Approx.2000 Pixel |
| Wavelength: | Center wavelength 10μm |
| Viewable Angle: |
Low-temp type 60°×60°, 25°×25° High-temp type 25°×25° |
| Radius Resolution: |
60°×60°---21.8mrad 25°×25°---9.1mrad |
| Frame Speed: |
Ethernet---3Hz (1Hz for alarm output) USB---0.5Hz |
| Focus: | Fixed focus |
| Emissivity: | 0.10 to 1.00 |
| Communications Interface: |
Ethernet---10BASE-T/100BASE-TX USB---USB2.0 |
| Alarm: | 2 points(Non voltage contact output) |
| Power Supply: | 12 to 24V DC |
| Power Consumption: |
Ethernet---Max 2.5VA (At 12V DC) USB---MAX 1.0VA (At 12V DC) |
| Inrush Current*1: | Max 1.3A (At 12V DC) |
| Working Temp: | ï¼10 to 50°C |
| Working RH: | 10 to 80%RH (No dew condensation) |
| Casing: | Polycarbonate (Color: Black) |
| Weight: | Approx. 150g (sensor only) |
| Protection: | IP65 (w/ provided exclusive cable and tripod screw) |
| Standards: | CE (EN61326 Annex A) |
Up to 4 sensors can be connected. Monitoring and alarm outputs from sensor can be used together.
Single unit can monitor 1 area and has 2 alarm outputs. When alarm goes on, the unit stores 1 image to the memory. Image saving updates every occurrence of alarm. Reading the data from host PC is possible.
The temperature data is outputted row-by-row horizontally by a command from PLC, etc.
| D | 1m | 3m | 5m |
| Width (m) | 1.4 | 4.2 | 7.0 |
| Width/Pix | 29 | 88 | 146 |
| D | 1m | 3m | 5m |
| Width (m) | 0.5 | 1.5 | 2.5 |
| Width/Pix | 10 | 31 | 52 |
| Performance Specification Sheet | Thermal Imaging Sensor | TP series | Download |
Risk Management Sensor
Detecting a scant supply condition of fluid material & measuring the temperature distribution
