Recorders

INPUT SPECIFICATIONS

Measuring points: 12 points, 24 points, 36 points, 48 points

Input types:        Universal

DC voltage --- ±13.8mV, ±27.6mV, ±69.0mV

                         ±200mV, ±500mV, ±2V 

                         ±5V*, ±10V*, ±20V*, ±50V* 

                          (*with built-in voltage divider)

DC current --- With external shunt resistor (sold separately) 

Thermocouple --- B, R, S, K, E, J, T, N, PtRh40-PtRh20,

W-WRe26, WRe5-WRe26, PlatinelII, NiMo-

Ni,CR-AuFe, U, L

Resistance thermometer --- Pt100, JPt100, Pt50, Pt-Co

*Contact CHINO for Nickel-100, Pt130, Pt25, Pt46, Cu10,Cu25,Cu53

Accuracy ratings:   ±0.1%±1 digit for DC voltage input

Reference junction compensation accuracy:

K, E, J, T, N, PlatinelII --- ±0.5°C or less

R, S, W-WRe26, WRe5-WRe26, NiMo-Ni, CR-AuFe, U, L --- ±1.0°C or less

Sampling rate:

Approximately 1sec./ 48 points

Disconnection of input signal is detected on thermocouple and resistance thermometer input. UP/DOWN/DISABLE is selectable.

Scaling:

Range/scale is selectable.

Digital filter:

Programming FIR filter for each point (common to

all points)

Allowable signal source resistance:

Thermocouple input (burnout disabled)/

DC voltage input (±2V or less) ---1kΩ or less

DC voltage input (±5V or more) ---100Ω or less Resistance thermometer --- 10Ω or less per wire (same resistance for 3 wires should be the same)

Input resistance:

Thermocouple input, DC voltage input --- Approx. 1 MΩ

Maximum input voltage:

DC voltage input (±2V or less)

Thermocouple DC voltage input (burnout disabled) --- ±10VDC DC voltage input (±5V to ±50V) --- ±60VDC

Dielectric strength between channels:

1000V AC or more between each channels

(High strength semiconductor relay used)

(B terminal of resistance thermometer is shorted inside between channels)

Common mode rejection ratio:

120dB or more

Series mode rejection ratio:

50dB or more

RECORDING SPECIFICATIONS

Additional memory:

CF card (Up to 8GB)

USB memory (Up to 8GB)

Recording cycle:

1, 2, 3, 5, 10, 15, 20, 30s,

1, 2, 3, 5, 10, 15, 20, 30, 60min

Logging data:

Measured data --- File name (group name), time of day, month and year of recording start, tag, measured data, alarm status/types and marker text

Setting parameter --- All parameters

Operation result data

Storing types:

Binary/CSV, selectable

Storing methods:

Manual start/stop (dedicated touch key operation)

Schedule (designation for time of day and date)

Trigger signal (alarm event, digital input)

Data recording of before and after trigger

*Pre-trigger is selectable.

Measuring numbers of pre-trigger --- Maximum 950 data

Recording group:

Up to 6 groups of 56 points can be programmed

(Up to total of 128 points)

COMPUTATION SPECIFICATIONS

Computation points:

Up to 128 points

Computation cycle:

100ms/ all every points

Computation types:

Arithmetic operations ---

Addition, subtraction, multiplication, division, remainder, exponential

Comparison operations ---

Equality, inequality, great, less, equality/great, equality/less

Logical operations ---

AND, OR, XOR, NOT

General functions ---

Round-up, round-down, absolute value, square root,

Exponent of e, natural logarithm, common logarithm

Integration operations ---

Analog integration, digital integration

Channel data operations ---

Measured data computation,

Calculated data computation

Others ---

Dew point, relative humidity, F-value Remaining capacity of CF card moving average

Wind direction (displays16 directions)

ALARM SPECIFICATIONS

Setups:

Up to 4 alarms can be programmed per channel

Alarm types:

Upper limit, lower limit, differential upper limit, differential lower limit (deadband is selectable), abnormal data

Delay function:

Setup range of alarm delay --- 0 to 3600sec.

Alarm settings:

AND/OR selectable

Alarm outputs:

Refer to optional specifications

DISPLAY SPECIFICATIONS

Display:

10.4"VGA TFT color LCD

Display types:

Measured data display (Trend screen, Data screen, Bar-graph screen, Circular trend screen)

Historical trend display (simultaneous display with Real-time trend is available)

Information display (alarm display, marker list, file list)

Setting screen (alarm, computation, memory, system, maintenance, communication, etc.)

Trend screen:

48 colors selectable

Display screen group--- Up to 6 groups

Display points --- Up to 56 points/group

Time axis direction --- Vertical, horizontal or circular

Line width --- selectable from 5 kinds

Scale display --- 4 scales

Tag/data display --- Show/hide selectable

Marker display

Numeric Data Display:

Display group--- Up to 6 groups

Display points --- Maximum 56 points/group

Display contents --- Measured value, channel/tag, unit, alarm status

Bar-graph screen:

48 colors selectable

Display screen group --- Up to 5 groups

Display points --- Maximum 56 points/group

Display direction --- Vertical or horizontal

Scale display --- 1 scale

Information display:

Alarm display (alarm activation/released history display) Marker list

File list (file list display of group data file)

Unit information (Model, Serial No, Option, etc.)

LCD back light:

Auto/manual OFF function

Brightness --- 4 levels adjust table

COMMUNICATION  FUNCTIONS

• Network (Option)

Communications type:

Ethernet (10BASE-T/100BASE-TX)

FTP server:

Data file can be read from the network computer

FTP client:

Transfer a data file to a network server

SNTP client:

The time can be synchronized to the time of SNTP server

Web server: 

Conformed to HTTP1.0 --- Displays screens, the alarm and information of maintenance by browser software (Internet Explorer 5.0 or later)

* User's ID and password registration available

E-Mail:

E-Mail notification at specified time for alarm activation Report data at specified time is selectable from all registered data

Notification address --- Maximum 8

• USB Communications

USB:

Communication type --- USB1.1

Transfer systems --- Bulk transfer, control transfer

File transfer by connecting as removable disk drive

OPTION SPECIFICATIONS

Alarm output:

Mechanical relay (c contact) output for alarm activation and input error.

Output point: 4 or 2 points

Contact capacity: resistive load 3A, inductive load 1.5A

Digital input (Non-voltage contact input/ 4 or 2 points):

ON/OFF signal: ON/OFF input recording

Pulse input: Maximum 10Hz pulse input

Used for flow rate, operation time and frequency

External drive: The following operations are available (selectable by parameter)

. Data memory triggering

. Marker display

. Integrated calculation reset

Communications interface:

High and low-order communication: Communications interface for high and low-order unit

RS485 (MODBUS)

Choose one function from the following 3 functions.

. Communication interface for high-order unit. Recording input data of CHINO products connected to a low-order unit and data in

PLC register.

Display and record parameter setting, measured value, setting value, etc. of up to 16 CHINO controllers.

Recording points:

12-channel specification --- 108 points 24-channel specification --- 96 points 36-channel specification --- 84 points 48-channel specification --- 72 points

Connectable models: KE, KR2S, KR3S, KR2000, KR3000,

LE5000, AL3000, AH3000,

DB1000, 2000, LT230, 830, 350, 370, 450, 470,

KP1000, KP2000, DP-G

(data collection only) JU, JW, SE3000

. Transfer input data of KR3S to PLC.

The input data can be written on PLC only. Data writing points: 44 points

Connectable PLC: Mitsubishi Electric Corporation

MELSEC AnA, QnA, QnAS, FX series OMRON Corporation SYSMAC series

Note) Separate purchase of protocol converter SC8-10 (optional) is required for connection to OMRON PLC.

Others:

Handle and rubber feet

GENERAL SPECIFICATIONS

Rated power voltage:

100 to 240V AC (universal power supply) 50/60Hz

Maximum power consumption:

60VA

Reference operating condition:

Ambient temperature --- 21 to 25°C

Ambient humidity --- 45 to 65%RH

Power voltage --- 100V AC±1.0%

Power frequency --- 50/60Hz±0.5%

Attitude --- Left/right, forward 0°, backward 0° Warm-up time --- Longer than 30 minutes

Normal operating condition:

Ambient temperature --- 0 to 50°C

Ambient humidity --- 20 to 80%RH

Power voltage --- 90 to 264V AC

Power frequency --- 50/60HZ ±2%

Attitude --- Left/right, forward 0°, backward 0° to 20°

Transport condition (at the packed condition on shipment from our factory):

Ambient temperature --- -20 to 60°C

Ambient humidity --- 5 to 90%RH (No dew condensation) Vibration --- 10 to 60Hz, 4.9m/s2 (0.5G) or less

Impact --- 392m/s2 (40G) or less

Storage condition:

Ambient temperature --- -20 to 60°C

Ambient humidity --- 5 to 90%RH (No dew condensation)

Power failure protection:

Flash memory stores the settings and the data.

Lithium battery backs up the clock and parameter RAM for more than 5 years (provided that the daily operating hours is longer than 8 hours).

Insulation resistance:

Secondary terminals and protective conductor terminals --- 20MΩ or more at 500V DC

Primary terminals and protective conductor terminals --- 20MΩ or more at 500V DC

Primary and secondary terminals --- 20MΩ or more at 500V DC

Primary terminals: power terminals (L, N), alarm output terminals Secondary terminals: measuring input terminals, digital input terminals, communications terminals

Dielectric strength:

Secondary terminals and protective conductor terminals --- 1 minute at 500V AC

Primary terminals and protective conductor terminals ---

1 minute at 1500V AC

Primary and secondary terminals --- 1 minute at 2300V AC Primary terminals: power terminals (L, N), alarm output terminals Secondary terminals: measuring input terminals, digital input terminals, communication terminals

Case assembly material:

Front bezel --- Polycarbonate and ABS resin (frame)

Case --- Steel

Color:

Front bezel --- Black (equivalent to Munsell N3.0)

Case --- Gray (equivalent to Munsell N7.0)

Weight:

Approximately 5.6kg (at maximum)

Mounting:

Panel mounting

Terminal screws:

Power terminals/protective conductor terminals --- M4.0 Measuring input terminals/alarm output terminals/digital input terminals --- M3.5

Communications terminals --- M3.0