KR2000 --- 6 points, 12 points
KR3000 --- 12 points, 24 points, 36 points and 48 points |
Universal
(Refer to the PS sheet) |
0.1% digit (exception)* Measurement range conversion accuracy.
* When sampling rate is set below 0.5s at KR2P61/KR2P21, then input will automatically becomes 4 points and sampling rate will be 100ms. |
K, E, J, T, N, PlatinelⅡ--- ±0.5ºC or less
|
100ms: Approximately 100ms for all points
1s: Approximately 300ms for all points |
| Disconnection of input signal is detected on thermocouple and resistance thermometer input. |
| 512MB |
| Store the data file to USB flash drive. |
100, 200, 500ms
1, 2, 3, 5, 10, 15, 20, 30s
1, 2, 3, 5, 10, 15, 20, 30, 60min |
Measured data --- Time of day, month and year of recording start, tag, measured data, alarm status/types, maker text, etc
Setting parameter --- All setting parameter
Comuptation result data |
| Binary type |
Manual start/stop
Schedule (designation for time of day and date)
Trigger signal (alarm event, digital input)
Data logging of before and after trigger points
* Pre-trigger is selectableMeasuring numbers of pre-trigger --- Max 950 data |
| Up to 4 alarms can be programmed per channel |
| Upper limit, lower limit, differential upper limit, differential lower limit (deadband is selectable), abnormal data |
| Setup range of alarm delay --- 1 to 3600 seconds |
| AND/OR selectable |
Measured data display
(Trend screen, Data screen, Bar-graph screen)
Historical trend display(simultaneous display with Real-time trend is available)
Information display(alarm display, marker list, file list)
Setting screen |
KR2000 --- Max 44 points
KR3000 --- Max 56 points
The LCD display may contain some pixels that always or never illuminate, and the brightness of some areas of the display may appear uneven. There are typical LCD performance characteristics and do not constitute malfunctions. |
| Ethernet (10BASE-T/100BASE-TX) |
| Transfer a data file to a network server |
| The time can be synchronized to the time of SNTP server |
E-Mail notification at specified time for alarm activation
Report data at specified time is selectable from all registered dataNotification address --- Maximum 8 contacts |
| 100 to 240V AC (universal power supply) 50/60Hz |
KR2000 --- 50VA
KR3000 --- 65VA |
Ambient temperature --- 0 to 50ºC
Ambient humidity --- 20 to 80%RH
Power voltage --- 90 to 264V AC
Power frequency --- 50/60Hz±2%
Attitude --- left/right 0°, forward tilting 0°,
backward tilting 0° to 20° |
KR2000 --- About 2.2kg (Max)
KR3000 --- About 7.2kg (Max) |
| Panel mounting |
Stabdard KR2000 Series Graphic Recorder
