top

img

IR-ESC Series Scanning Type Radiation thermometers

The IR-ESC series is scanning type radiation thermometers for low temperature and is applicable to measure width-direction temperature patterns of moving or rotating objects. The temperature range is 100°C to 600°C.
The system is consisted of a scanning unit, a display/operation unit with a built-in exclusive software for operation and graphic display, and connection cables.

The small sized (300 x 200 x 120mm) scanning unit is easy to install.
The temperature range is wide (100°C to 600°C).
The display/operation unit with a built-in exclusive software displays thermal-images in pattern, trend and color modes (Windows95 or WindowsNT4.0, to be specified).
The output is 0 to 5VDC for 7 position points + 1 peak point or 3 zone peak points.
For targeting of objects, a direct viewfinder type or laser spotting type are available. (option)
An exclusive kiln shell software for cement kilns is separately prepared.

 

 

Model Type
IR-ESCF21⬚ Scanning unit Scanning speed 5 times/second
IR-ESCF22⬚ Scanning unit Scanning speed 10 times/second
IR-EPW5 Display/operation unit Wndows95
IR-EPN5 Display/operation unit WindowsNT4.0
IR-ZECC⬚⬚⬚ Cable between scanning unit and relay terminal unit
IR-ZEPC⬚⬚⬚ Cable between relay terminal unit and display/operation unit
IR-ZERC⬚⬚⬚ Cable for output from display/operation unit
IR-ZECS Protective case

 

 

Scanning Unit
Scanning system Optical axis scanning by a rotating mirror
Element Cooling type PbS
Scanning angle 90°
Scanning speed 5 times/second or 10 times/second (to be specified)
Measuring system Narrow-band type radiation thermometer
Measuring temperature 100 to 600°C
Accuracy rating Less than 400°C: ±4°C
400°C or higher: ±1.0% of measured value
(atε= 1, ambient temperature 23°C ± 5°C)
Resolution Less than 400°C: 3°C
400°C or higher: 2°C
Emissivity compensation 1.0 to 0.2
Measuring distance 0.5m to ∞
Instant viewfield (mm𝟘) Measuring distance L (mm)/Distance factor 150
Response time 0.5ms (90% response)
Targeting Direct viewfinder or laser spot (option)
Laser ON/OFF by switch, Laser: less than 1mW, 645mm, class 2
Output Temperature pattern: 0 to 20mADC, Peak temperature: 4 to 20mADC, Scanning angle: Open collector (max load voltage 35VDC, max load current 10mADC)
Emissivity remote setting 4 to 20mADC
Working temperature 0 to 50°C
Power supply 100 to 240VAC
Allowable voltage fluctuation +10% to 15% of rated value
Power consumption About 40VA
Connection Connector connection
Cable length Exclusive cable, maximum 200m
Case material/color Aluminum/gray
Dimensions/
weight
300W x 200H x 120Dmm, about 6.5kg
Display/operation unit
  Windows95 or WindowsNT4.0 (to be specified)
CRT 800 x 600 dots
Screen Thermal-image display in pattern, trend and color modes
Input 0 to 5VDC (adding 250Ω to 4 to 20mADC from scanning unit)
Output 0 to 5VDC (without isolation)
Output points (1) 7 position points + 1 peak point or (2) 3 zone peak points at sampling mode
Software Built-in thermal-image software
Rated power voltage 100 to 240VAC 50/60Hz
Weight About 8.5kg
Kiln shell software
  Kiln shell hot spot monitoring (Zone peak temperature graph, thermal-image display, historical display, report output)
Screen renewal cycle At each 2-rotation of kiln
Hot detection Hot detection at the maximum temperature in each zone (with a function detecting rate-of-change)
Zone division: 20 divisions (optional position setting)
Hot detection: Alarm setting temperature Zone maximum temperature, Alarm setting: Setting at each zone
Radiation temperature measuring range: 0.1°C increment
Maximum scanning 250 times/1 kiln rotation
Thermal-image display color Color/°C (400 colors in case of measuring range of 100 to 600°C)
Screen Main screen
(1) Data display: Zone peak temperature bar graph, Extensive thermal-image
(2) Function button: Settings, Start/stop of measurement, History, Quit
(3) Operation status (measuring, waiting)
Setting Alarm setting
Data storage Zone maximum/minimum temperature per hour, Each zone maximum temperature per day, Extensive thermal-image at detection of maximum temperature per day, Maximum/minimum/average temperature pattern per day, Semipermanent storage (about 1GB exclusive file in year)
Storage type: Exclusive file (automatic storage, for replay), Excel 97 type file (each 1 hour data base, trend data)
History/analysis Data base replay/display at historical mode, Printer output of report
(1) Data viewer: List display of stored data
  • Data per day: Date, time, maximum temperature, its generated zone
  • Extensive thermal-image: Thermal-image at detection of maximum temperature per day
  • Data/hour: List display of maximum temperature per hour of each zone (generated data identification enabled)

    (2) Pattern data reading screen
  • Maximum/minimum/average temperature pattern per day, alarm/zone, setting temperature display, printing

    (3) Report: Display of daily report, monthly report, image report (per day), Printer output

    (4) Trend: Historical trend of peak temperature of each zone, Printer output (with functions of time-axis expansion and scroll)

 

 

Instruction Manual Scanning Type Radiation thermometers IR-ESC Download
Leave a feedback